1964 GMC Driveline and Axles Parts


Showing 1 - 10 of 249 products
Image
SKU
Product
Rating
Price

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Standard Brakes
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
1964 - GMC 1500 Series Front Inner RWD

FelPro
  • Axle Flange Gasket
  • with 8 Bolt Holes 2-23/32in Inside Diameter x 4-7/16in Outside Diameter
  • FEL-PRO 55350 Axle Flange Gasket
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
12471641, 327739, 37013, 7429210, 76-0002, DS14243, J17829

Additional Fitment Information:
Vehicle Position
1964 - GMC PB2500 Series Rear

FelPro
  • Axle Hsg. Cover or Diff. Seal
  • with 10 Bolt Holes Spicer 60-1 with 9.75in Ring Gear
  • FEL-PRO RDS 6095-1 Axle Hsg. Cover or Diff. Seal
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
1685555, 1795158, 1922270, 2231855, 2232311, 2358865, 2428499, 2494737, 2515343, 2952471, 30281, 31978, 31979, 33232, 345660, 34686, 34687, 36016...VIEW MORE

Additional Fitment Information:
Vehicle Position
1964 - GMC PB2500 Series Rear

FelPro
  • Axle Hsg. Cover or Diff. Seal
  • with 10 Bolt Holes Spicer 44-1 with 8.5in Ring Gear
  • FEL-PRO RDS 6629 Axle Hsg. Cover or Diff. Seal
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
27441X, 34685, 36016, 36030, C7TZ4036B, DT002, P27768T, P27768TC

Additional Fitment Information:
Vehicle Position
1964 - GMC 1500 Series Rear

FelPro
  • Axle Hsg. Cover or Diff. Seal
  • with 10 Bolt Holes Spicer 44-5F with 8.5in Ring Gear
  • FEL-PRO RDS 6629 Axle Hsg. Cover or Diff. Seal
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Additional Fitment Information:
Vehicle Position
1964 - GMC 1500 Series Front

FelPro
  • Axle Hsg. Cover or Diff. Seal
  • with 10 Bolt Holes Spicer 44-5CFHD with 8.5in Ring Gear
  • FEL-PRO RDS 6629 Axle Hsg. Cover or Diff. Seal
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Additional Fitment Information:
Vehicle Position
1964 - GMC 3000 Front

Auburn Gear
  • G.M. 12 Bolt
  • Selectable Full Locker w/Limited Slip; For Use w/2.76-3.42 Ratio; 3 Series Case; 30 Spline 8.875 in. (12 Bolt)
  • ECTED MAX DIFFERENTIAL
  • Auburn Gear Ected Max
  • Features:
    • Selectable Full Locker And Limited Slip In One Unit
    • Can Be Engaged/Disengaged At Any Safe Road Speed
    • Smooth Quiet Operation
    • Can Be Use With Or Without Lockout Hubs
    • Made From 9310 Heat Treated Billet Steel
    • Backed By 1 Year Warranty
    • Covered w/4 Yr Differential-Replacement Exchange
    • Made In The USA
  • The ECTED Max is a selectable traction device; an on/off switch is mounted near the driver. When off–the clutch pack,located behind the side gear provides the limited slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed and thereby providing bias torque to the high traction wheel–your performance limited slip differential action. When selected on, current is sent to the electromagnetic coil. The coil is retained by a clip that fits over one of the bearing cap bolts, making it non-rotational. The coil rides on a ball bearing. The ball bearings spin with the differential case. The coil creates a magnetic flux so that the pilot cone is pulled into engagement with the differential case. This frictional engagement causes the bearing balls to ride up on a ramp machined into the side gear. This radial travel of the balls also causes lateral movement of the side gear. This applies a force onto the center block. The center block has an elongated hole that the center pin fits through, allowing it to float. The center block applies force to the opposite side gear, compressing the clutch pack giving the user a solid axle assembly–the spool/locker performance you desire at the strip/off-road. ECTED Max gearing is made from aircraft quality, 9310 heat-treated billet steel. Tough as nails! ECTED Max can be switched on or off on the fly, at any road speed. ECTED Max does not have any shift forks or pins that must be lined up to obtain locker mode. ECTED Max is quiet. Good-bye to noisy lockers! ECTED Max is backed by industry-leading 1 year warranty, like all Auburn Gear Performance Differentials. ECTED Max is backed by the industry-exclusive program. D-REX=Differential–Replacement EXchange Program. ECTED Max can be used in front axle applications–with or w/out lockout hubs. ECTED Max is the only selectable locker offering both limited slip and locker modes. Forget the rest-go with the best!

Additional Fitment Information:
Vehicle Position
1964 - GMC Suburban Rear

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Position Drive Type
1964 - GMC 1000 Series Front Inner 4WD

FelPro
  • Differential Cover Gasket
  • with 12 Bolt Holes GMC H031
  • FEL-PRO RDS 13391 Differential Cover Gasket
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

This Part Fits the Following OEM/Substitute Numbers:
36033, 3818758, 3844178, 3998513, 7429244, 76-2063, DS14212, P27940, P27940TC

Additional Fitment Information:
Vehicle Position
1964 - GMC I1000 Rear

FelPro
  • Differential Cover Gasket
  • with 12 Bolt Holes GMC H029
  • FEL-PRO RDS 13391 Differential Cover Gasket
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Additional Fitment Information:
Vehicle Position
1964 - GMC I1000 Rear
Showing 1 - 10 of 249 products

Loading...