2015 Jeep Yukon Gear Parts

Choose a Model for your 2015 Jeep


Showing 1 - 10 of 96 products
Image
SKU
Product
Rating
Price

Yukon Gear
  • Yukon Master Overhaul kit for Dana 30 reverse rotation diff for use with+07 JK
  • Dana; For Use w/Reverse Rotation Diff Dana 30~Dana 30 JK Front; Differential Rebuild Kit; Timken Bearings; Includes Inner Axle Seals
  • Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
  • Yukon Differential Master Overhaul Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
    • Model:
      • Dana 30 Reverse
      • Dana 30 Standard
  • Features:
    • Fits Dana Spicer 30 JK
    • Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
    • Includes Carrier Bearings/Races
    • Pinion Bearings/Races
    • Pinion Seal
    • Axle Seals
    • Complete Shim Kit
    • Ring Gear Bolts
    • Includes Pinion Nut
    • Crush Sleeve
    • Oil Baffles/Slingers
    • Thread Locker
    • Marking Compound w/Brush And Gasket
  • Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2015 - Jeep Wrangler V 3604 6 Cyl 3.6L Unlimited Sahara 220

Yukon Gear
  • Yukon Chromoly Rear Axle Kit; Dana 44; Jeep JK Rubicon; RH; 32 Spline; 32.6in.
  • Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)~Dana 44; JK Rubicon; 32.6 in. Long
  • Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
  • Axle Shaft
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana 44 Differential
    • For Right-Hand Side
    • Measures 32.6 in
    • 32 Spline
    • 5 X 5.0 in. Bolt Pattern
    • Heavy Duty 4340 Chromoly Construction
    • Includes Axle Bearing And Seal
    • ABS Ring
    • Retainer
    • And Studs
  • Yukon Gear & Axle offers an extensive line of general replacement and high-performance axles for passenger car, truck and SUV applications. High quality alloys and the latest in heat-treating technologies provide a stronger-than-stock axle for off-road, on the street, or at the track.

Additional Fitment Information:
Vehicle Position Sub Model
2015 - Jeep Wrangler Rear Right Unlimited Rubicon

Yukon Gear
  • Yukon Gear/Install Kit package for Jeep JK Rubicon; 4.11 ratio.
  • 4.11 Ratio 4.11 Ratio
  • Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
  • Yukon Gear And Install Kit
  • Product Attributes:
    • Axle Type: Dana 44
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
      • Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Model: Chrysler 11.5 In.
  • Features:
    • Fits Jeep Rubicon JK
    • Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
    • 4.11 Ratio
  • Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.

This Part Fits the Following OEM/Substitute Numbers:
ZGK056

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
2015 - Jeep Wrangler V 3604 6 Cyl 3.6L Unlimited Rubicon 220

Yukon Gear
  • Yukon bearing install kit for Dana 44 JK non-Rubicon rear differential.
  • Dana 44 Dana 44; Non-Rubicon JK; Rear
  • Yukon Bearing installation kits are perfect for shops/builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
  • Differential Bearing Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
  • Features:
    • Fits Dana Spicer 44 JK Non-Rubicon Rear
    • Includes Are Carrier Bearings/Races
    • Pinion Bearings/Races
    • Pinion Seal
    • Crush Sleeve
    • Includes Are Oil Baffles/Slingers
    • Marking Compound/Brush
  • Yukon Bearing Installation Kits are perfect for shops and builders who have shims on the shelf and are looking to save cost over a Master Overhaul Kit. This kit uses Timken bearings and races along with all high-quality small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to properly install your ring and pinion gear set.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2015 - Jeep Wrangler V 3604 Rear 6 Cyl 3.6L 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Rubicon 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Jeep Wrangler V 3604 Rear 6 Cyl 3.6L Rubicon 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Sport 220

Yukon Gear
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up
  • Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall
  • Yukon replacement standard open carrier case for Dana 30; 3.73/up; 1.943in. tall. If purchasing this case for a D30 JK front; you will need to also purchase spider gear set YPKD30-S-27.
  • Carrier Case
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Dana Spicer 30
    • Does Not Include Spider Gears
    • 3.73 And Up Ratio Only
    • Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Jeep Wrangler V 3604 Rear 6 Cyl 3.6L Unlimited Sport 220

Yukon Gear
  • Yukon Replacement Front standard Open Carrier Case for Jeep JK D30
  • D30; bare case without internal gears; fits 3.73 and up gear ratios~Dana 30 JK Front. Bare Std. Open Carrier Case without Internal Gears. Fits 3.73 and up gear ratios
  • Yukon replacement standard open carrier case for Dana 30 JK front; 3.73/up
  • Differential Carrier Cases
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Jeep JK
    • Dana 30
    • 3.73 And Up
    • Front
    • Replacement Front Standard Open Carrier Case
  • Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
2015 - Jeep Wrangler V 3604 Front 6 Cyl 3.6L Sahara 220

Yukon Gear
  • Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
  • AMC 20; Timken Brand; Some Flanged Dana 44; Non-Rubicon JK; Timken Brand; Some Flanged
  • Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
  • Axle Bearing/Seal Kit
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Includes Axle Bearing And Seal
    • Services One Side
    • Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
  • Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.

Additional Fitment Information:
Vehicle Position
2015 - Jeep Wrangler Rear
Showing 1 - 10 of 96 products

Loading...