1983 Buick Flowmaster Parts

Choose a Model for your 1983 Buick


Showing 1 - 4 of 4 products
Image
SKU
Product
Rating
Price

Flowmaster
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • Super 44™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
  • Super 44™ Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • Outlet Connection Type: Pipe
    • Muffler Series: Super 44 Series
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: Oem
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Deep Aggressive Exhaust Note
    • Noticeable Interior Resonance
    • Recent Two Chamber Improvement
    • Race Proven Patented Delta Flow® Technology
    • No Internal Packing To Blowout
    • Premium Flowmaster Quality
  • Flowmasters Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler weve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Buick Regal V - 8 Cyl 5.0L Base 305

Flowmaster
  • Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required Use Offset Inlet/Offset Outlet Mufflers Only
  • Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Tubing Diameter: 2.500 In.
    • Automotive Item Grade: High Performance
    • Exit Position: Dual Rear
    • Inlet Diameter: 2.500 In.
    • System Type: Tailpipe
    • WARNING CA Proposition 65: No
    • Fitment: Direct Oe Replacement
    • Overall Length: 65.250 In.
    • Outlet Diameter: 2.500 In.
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • 3 Year Limited Warranty
    • Premium Flowmaster Quality
  • These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Buick Regal V - 6 Cyl 4.1L Base 252

Flowmaster
  • Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
  • Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Tubing Diameter: 2.500 In.
    • Automotive Item Grade: High Performance
    • Exit Position: Dual Rear
    • Inlet Diameter: 2.500 In.
    • System Type: Tailpipe
    • WARNING CA Proposition 65: No
    • Fitment: Direct Oe Replacement
    • Overall Length: 65.250 In.
    • Outlet Diameter: 2.500 In.
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • 3 Year Limited Warranty
    • Premium Flowmaster Quality
  • These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Buick Regal V - 6 Cyl 4.1L Estate Wagon 252

Flowmaster
  • Super 44™ Delta Flow Muffler
  • 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
  • Super 44™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
  • Super 44(TM) Delta Flow Muffler
  • Product Attributes:
    • Tip Quantity: 0
    • Muffler Type: Reflection
    • Outlet Position: Center
    • Inlet Diameter: 2.250 In.
    • Sound Level: Aggressive
    • WARNING CA Proposition 65: No
    • Fitment: Universal
    • Body Width: 9.750 In.
    • Inlet Type: Single Offset
    • Body Length: 13.000 In.
    • Inlet Outside Diameter: 2.250 In.
    • Inlet Connection Type: Pipe
    • Outlet Diameter: 2.500 In.
    • Mount Type: Uses New Hangers (not Included)
    • Automotive Item Grade: High Performance
    • Outlet Connection Type: Pipe
    • Muffler Series: Super 44 Series
    • Overall Length: 19.000 In.
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: Oem
    • Shape: Oval
    • Inlet Position: Offset
    • Outlet Type: Single Center Outlet
  • Features:
    • Durable Fully Welded 16ga Aluminized Steel
    • 3 Year Limited Warranty
    • Deep Aggressive Exhaust Note
    • Noticeable Interior Resonance
    • Recent Two Chamber Improvement
    • Race Proven Patented Delta Flow® Technology
    • No Internal Packing To Blowout
    • Premium Flowmaster Quality
  • Flowmasters Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler weve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Buick Regal V - 8 Cyl 5.0L Base 305
Showing 1 - 4 of 4 products

Loading...