2007 Honda CURT Parts

Choose a Model for your 2007 Honda

Accord CR-V Civic Element Fit Odyssey Pilot Ridgeline S2000

Showing 1 - 10 of 54 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2007 Honda Odyssey Trailer Hitch - Rear 6 Cyl 3.5L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Honda Odyssey
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes
CURT 13068 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Honda Odyssey
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda Odyssey (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2007 - Honda Odyssey	V	3471	Rear	6 Cyl 3.5L	-

16 In Stock

$307.06 CAD

$368.47 CAD

Brand	CURT
Part #	13068
Condition	New
Warehouse	C

2007 Honda CR-V Trailer Hitch - Rear 4 Cyl 2.4L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Honda CR-V
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
CURT 13555 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Honda CR-V
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda CR-V (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2007 - Honda CR-V	L	2354	Rear	4 Cyl 2.4L	144

10 In Stock

$333.00 CAD

$399.60 CAD

Brand	CURT
Part #	13555
Condition	New
Warehouse	C

2007 Honda Pilot Trailer Hitch - Rear 6 Cyl 3.5L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Acura MDX; Honda Pilot
5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 3500lbs. Weight Distributing; 350lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 20 Minutes
CURT 13328 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Acura MDX; Honda Pilot
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Acura MDX and Honda Pilot (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2007 - Honda Pilot	V	3471	Rear	6 Cyl 3.5L	EX	-

4 In Stock

$357.57 CAD

$429.08 CAD

Brand	CURT
Part #	13328
Condition	New
Warehouse	C

2007 Honda Ridgeline Trailer Wiring Adapter Connector CURT

Dual-Output 7/4-Way Connector with Backup Alarm (Plugs into USCAR)
w/Back Up Alarm; GM/Ford Plug For Models w/Factory Tow Package
CURT 57101 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors with Backup Alarm; Factory Tow Package and USCAR Socket Required
7-Way Round RV To 4-Way Flat Adapter
Product Attributes:
- WARNING CA Proposition 65: Yes
Features:
- Plugs Into Round Uscar Socket On Ford Or Gm
- Replaces The Factory-Equipped 7-Way Socket
- Integrated Backup Alarm Sounds When Vehicle Is In Reverse
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Rave Blade Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
A CURT custom original equipment vehicle-to-trailer connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs OE vehicle-to-trailer connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom OE connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom vehicle-to-trailer wiring connector provides a multi-function connector socket. It is designed to plug into a circular 7-prong OEM socket and replace a factory-equipped 7-way connector with a 7-way RV blade and 4-way flat. It specifically offers a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle).This multipurpose socket comes with its own backup alarm, a mounting bracket and all necessary mounting hardware for a complete installation. CURT custom vehicle-to-trailer wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Additional Fitment Information:

Vehicle
2007 - Honda Ridgeline

29 In Stock

$49.08 CAD

$58.90 CAD

Brand	CURT
Part #	57101
Condition	New
Warehouse	C

2007 Honda Ridgeline Trailer Wiring Harness CURT

Dual-Output 7/4-Way Connector (Plugs into USCAR)
7-Way And 4-Way For Models w/Factory Tow Package
CURT 55774 Dual-Output Vehicle-Side 7-Pin; 4-Pin Connectors; Factory Tow Package and USCAR Socket Required
OEM Vehicle To Trailer Connector w/Harness
Product Attributes:
- Output Type: 4-way Flat
- Connector Style: 7 Blade And 4 Flat
- WARNING CA Proposition 65: Yes
- Connector Type: Vehicle Side
Features:
- Plugs Into Connector To Provide A 4-Way And 7-Way Multi-Socket
- Fits Uscar-Equipped Vehicles w/Factory Tow Plugs
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- 7-Way Round Socket Adds Reverse Lights Electric Brakes
- Dust Covers Included To Keep Connectors Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Bracket Securely Mounts Wiring To The Vehicle Or Trailer Hitch
- Made In USA
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURTs custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicles electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Additional Fitment Information:

Vehicle
2007 - Honda Ridgeline

45 In Stock

$43.62 CAD

$52.34 CAD

Brand	CURT
Part #	55774
Condition	New
Warehouse	C

2007 Honda Pilot Trailer Connector Kit CURT

Custom 4-Flat; Select Honda and Acura Vehicles; OEM Tow Package Required
Circuit Protected; 3-Wire System; 4-Flat; Tail Light Circuit 7.5 Amps; Turn And Brake Circuit 3.0 Amps Install Time 10 Minutes~Connects Behind Driver/Passenger Side Tail Light Housing
CURT 55336 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Honda Accord; CR-V; Odyssey; Pilot; Acura Integra; CL; RL; TL; MDX
Custom Wiring Connector
Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected
- WARNING CA Proposition 65: Yes
- Install Time: 10 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 7.5 Amp
Features:
- Plugs Into Existing Vehicle Socket To Provide 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Honda Accord, CRV, Element, Odyssey, Pilot and Prelude, Acura Integra, CL, RL, TL and MDX and Isuzu Oasis (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.

Additional Fitment Information:

Vehicle	Sub Model
2007 - Honda Pilot	EX

11 In Stock

$40.89 CAD

$49.07 CAD

Brand	CURT
Part #	55336
Condition	New
Warehouse	C

2007 Honda Accord Trailer Hitch - Rear 4 Cyl 2.4L CURT

Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Honda Accord
2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 50 Minutes
CURT 11327 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Honda Accord
Class I 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 50 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Accord (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2007 - Honda Accord	L	2354	Rear	4 Cyl 2.4L	144

Brand	CURT
Part #	11327
Condition	New
Warehouse	C

2007 Honda Accord Trailer Connector Kit CURT

Custom Wiring Harness; 4-Way Flat Output; Select Honda Accord; Acura TSX
Circuit Protected; 3-Wire System; 4 Way Flat; Tail Light Circuit 7.5 Amps; Turn And Brake Circuits 3.0 Amps Install Time 10 Minutes
CURT 55502 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Honda Accord; Acura TSX
Custom Wiring Harness
Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected
- WARNING CA Proposition 65: Yes
- Install Time: 10 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 7.5 Amp
Features:
- Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Honda Accord and Acura TSX (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Additional Fitment Information:

Vehicle	Sub Model
2007 - Honda Accord	Hybrid

Brand	CURT
Part #	55502
Condition	New
Warehouse	C

2007 Honda Element Trailer Hitch - Rear 4 Cyl 2.4L CURT

Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Honda Element
2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
CURT 11700 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Honda Element
Class I 1.25 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Honda Element (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2007 - Honda Element	L	2354	Rear	4 Cyl 2.4L	EX	144

Brand	CURT
Part #	11700
Condition	New
Warehouse	C

2007 Honda Element Trailer Hitch - Rear 4 Cyl 2.4L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Honda Element
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
CURT 13574 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Honda Element
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 30 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Honda Element (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.