2004 Acura Wheel Bearing Parts

Choose a Model for your 2004 Acura


Showing 1 - 10 of 166 products
Image
SKU
Product
Rating
Price

National Bearing
  • Wheel Bearing
  • National 510030 Wheel Bearing
  • Product Attributes:
    • Inner Race Radius (Inch): 0.150
    • Design: Double Row Angular Contact
    • Width (Inch): 1.614
    • Outer Race Outside Diameter (Inch): 3.110
    • Outer Race Outside Diameter (MM): 79.000
    • Inner Race Radius (MM): 3.800
    • Inner Race Bore (Inch): 1.693
    • Inner Race Width (MM): 41.000
    • Footnote: Gen1
    • Inner Race Width (Inch): 1.614
    • Outer Race Width (Inch): 1.496
    • Outer Race Width (MM): 38.000
    • Bore (Inch): 1.693
    • Inner Race Bore (MM): 43.000
    • Outer Race Radius (MM): 0.059
    • Outside Diameter (Inch): 3.110
    • Outer Race Radius (Inch): 0.002
    • Part Description: Wheel Bearing
  • Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
051-4048, 38-00936, 44300-S04-A01, 44300-S04-A02, 44300-S5A-000, 44300-S5A-004, 44300-S5A-008, 44300-S6D-E01, 44300-SD6-E01, 44300-SR3-A02, 44300-SR3-A04, 44300-ST3-E01, 510030, 510067, 710030, CR2303, CR7084, FW171...VIEW MORE

Additional Fitment Information:
Vehicle Position
2004 - Acura EL Front

NTN
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position
2004 - Acura TSX Front

NSK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position
2004 - Acura RSX Front

NSK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position
2004 - Acura EL Front

NSK
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • This bearing is equipped with an internal ABS sensor magnet. Care must be taken during installation to insure that the sensor magnet is located on the correct side of the bearing housing. Failure to do so may cause a malfunction in the ABS system. For more info, refer to the appropriate section of your service manual or check with your local dealer.

Additional Fitment Information:
Vehicle Position
2004 - Acura TSX Front

NTN
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position
2004 - Acura MDX Front

Koyo
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position
2004 - Acura RL Front

NTN
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:
Vehicle Position
2004 - Acura RSX Front

NTN
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Rear

Additional Fitment Information:
Vehicle Position
2004 - Acura MDX Rear

National Bearing
  • Wheel Bearing
  • National 510050 Wheel Bearing
  • Product Attributes:
    • Inner Race Radius (Inch): 0.138
    • Design: Double Row Angular Contact
    • Width (Inch): 1.654
    • Outer Race Outside Diameter (Inch): 3.307
    • Outer Race Outside Diameter (MM): 84.000
    • Inner Race Radius (MM): 3.500
    • Inner Race Bore (Inch): 1.772
    • Inner Race Width (MM): 42.000
    • Footnote: Gen1
    • Inner Race Width (Inch): 1.654
    • Outer Race Width (Inch): 1.575
    • Outer Race Width (MM): 40.000
    • Bore (Inch): 1.772
    • Inner Race Bore (MM): 45.000
    • Outer Race Radius (MM): 1.000
    • Outside Diameter (Inch): 3.307
    • Outer Race Radius (Inch): 0.039
    • Part Description: Wheel Bearing
  • Designed to meet or exceed OE quality, premium-quality bearings from National® are manufactured to exacting standards to deliver lasting performance and extended bearing life.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
051-4140, 4007FW, 41240009, 42200-S3V-A01, 44300-S0A-003, 44300-S1A-E01, 44300-S47-008, 44300-S84-A01, 44300-S84-A02, 44300-SCA-E01, 510039, 510050, 710050, FW145, FW45, VKBA3951, WH510039, WH510050...VIEW MORE

Additional Fitment Information:
Vehicle Position
2004 - Acura RSX Front
Showing 1 - 10 of 166 products

Loading...