2023 Steering Tie Rod Assembly Parts

Choose a Make for your 2023 vehicle

BMW Chevrolet Ford GMC

Showing 1 - 6 of 6 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2023 Ford Bronco Steering Tie Rod Assembly - Front ICON Vehicle Dynamics

21-22 BRONCO XD TIE ROD KIT
ICON XD Forged Tie Rods offer significant increase in strength with better materials and beefier dimensions than the stock tie rods while also capable of same range of motion and offer same tire fitment as OE units.
21-23 BRONCO XD TIE ROD KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm.
- Grease Fitting Included: Yes
- Adjustable: Yes
- Grade Type: Extreme Duty
- Title: 21-22 Bronco Tie Rod Kit
- Castle Nut Included: Yes
- End 1 Gender: Male
- End 2 Gender: Female
Features:
- 30% larger diameter than OE tie rods
- 4140 chromoly inner ball studs
- Forged steel outer tie rod ends
- Metal on metal ball joint design with grease zerks
- Design to fit around factory wheel off set
- Includes inner tie rod boots that protect the steering rack from dirt and debris
- Limited lifetime warranty
The strength limitations of the Bronco's factory steering tie rods has been well documented, especially by Bronco owners who venture into the big rocks with big tires. These ICON XD Forged Tie Rods remedy this with better materials and beefier dimensions than the stock units. The inner tie rod and ball stud is CNC machined from 4140 chromoly. The adjustment threads, where we've seen most of the failures happen on stock tie rods, are18mm on the XD Forged Tie Rods versus 14mm on stock Bronco tie rods. The outer tie rod is forged steel and has the same bend as the stock tie rods for fitting all of the Bronco's factory wheel diameters and offsets, along with just about any aftermarket wheel. The tie rod end is a beefier, metal on metal joint that is greaseable for extended service life and has the same range of operating angle as the stock tie rod ends. For the most hardcore of off-roaders, the ICON XD Forged Tie Rod kit is recommended as part of a comprehensive steering system upgrade strategy.

Additional Fitment Information:

Vehicle	Position	Sub Model
2023 - Ford Bronco	Front	Wildtrak

7 In Stock

$639.49 CAD

$767.39 CAD

Brand	ICON Vehicle Dynamics
Part #	I4345212
Condition	New
Warehouse	B

2023 Ford Bronco Steering Tie Rod Assembly Fabtech

Assembly Kit; Driver And Passenger Does Not Fit Vehicles w/Equipped With Hoss 3.0 Package
Heavy Duty Tie Rod Kit

Additional Fitment Information:

Vehicle
2023 - Ford Bronco

320 In Stock

$502.34 CAD

$602.81 CAD

Brand	Fabtech
Part #	F37FTS22350
Condition	New
Warehouse	B

2023 GMC Sierra 2500 HD Steering Tie Rod Assembly - Front Fabtech

HD; For Fabtech 6 in. RTS System; For Veh. Eqd. w/13.5 in. Wide Tires/Greater Mntd on Wheels w/5 3/4 in. BS Req PN[FTS21119]
Tie Rod Assembly; HD; For Fabtech 6 in. RTS System; For Veh. Eqd. w/13.5 in. Wide Tires/Greater Mntd on Wheels w/5 3/4 in. BS Req PN[FTS21119];
Tie Rod Assembly
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
Features:
- Not Just A Replacement Tie Rod End But An Heavy Duty Upgrade
- Fabtech Has Sourced These Heavy Duty Tie Rod Ends To
- Improve The Steering Strength And Service Life Of Your Vehicle
Fabtechs Heavy Duty Tie Rod assemblies are designed to resist bending and breakage when running oversized tires. The extra large diameter Tie Rods are forged and are superior in strength to the inherent weak factory tie rods that are known for bending under light off road use. The Fabtech Tie Rod assemblies directly replace factory Tie Rods without modification to the centerlink or steering knuckles for a fast easy installation.

Additional Fitment Information:

Vehicle	Position
2023 - GMC Sierra 2500 HD	Front

37 In Stock

$605.20 CAD

$726.24 CAD

Brand	Fabtech
Part #	F37FTS71006
Condition	New
Warehouse	B

2023 GMC Sierra 2500 HD Steering Tie Rod Assembly - Front Fabtech

Single; For Stock Suspension w/13.5 in. Wide Tires/Fabtech 4 in. Ultimate System/May Fit 6 in Aftermarket Systems; PN[FTS21119] Required
Tie Rod Assembly; Single; For Stock Suspension w/13.5 in. Wide Tires/Fabtech 4 in. Ultimate System/May Fit 6 in Aftermarket Systems; PN[FTS21119] Required;
Tie Rod Assembly
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
Features:
- Not Just A Replacement Tie Rod End But An Heavy Duty Upgrade
- Fabtech Has Sourced These Heavy Duty Tie Rod Ends To
- Improve The Steering Strength And Service Life Of Your Vehicle
Fabtechs Heavy Duty Tie Rod assemblies are designed to resist bending and breakage when running oversized tires. The extra large diameter Tie Rods are forged and are superior in strength to the inherent weak factory tie rods that are known for bending under light off road use. The Fabtech Tie Rod assemblies directly replace factory Tie Rods without modification to the centerlink or steering knuckles for a fast easy installation.

Additional Fitment Information:

Vehicle	Position
2023 - GMC Sierra 2500 HD	Front

55 In Stock

$510.50 CAD

$612.60 CAD

Brand	Fabtech
Part #	F37FTS71005
Condition	New
Warehouse	B

2023 BMW 228i Gran Coupe Steering Tie Rod Assembly - Right Lemfoerder

2023 BMW 228i Gran Coupe Steering Tie Rod Assembly - Right Lemfoerder

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information:

Vehicle	Position
2023 - BMW 228i Gran Coupe	Right

Brand	Lemfoerder
Part #	LEM4094444
Condition	New
Warehouse	A

2023 BMW 228i Gran Coupe Steering Tie Rod Assembly - Left Lemfoerder

2023 BMW 228i Gran Coupe Steering Tie Rod Assembly - Left Lemfoerder

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Additional Fitment Information: